How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob Your Own Question
Bob
Bob, Auto Tech
Category: Chevy
Satisfied Customers: 4087
Experience:  Plus 40 years GM, over 30 certified with Chevrolet, ASE certified Master Tech. (Expired, Retired)
2210118
Type Your Chevy Question Here...
Bob is online now
A new question is answered every 9 seconds

take out old battery& install new battery

Customer Question

take out old battery& install new battery
Submitted: 9 years ago.
Category: Chevy
Expert:  Bob replied 9 years ago.
Removal Procedure

    Object Number: 179591  Size: SH

  1. Disconnect the negative battery cable (2 ).
  2. Disconnect the positive battery cable (1 ).
  3. Remove the battery hold down retainer.
    Object Number: 289311  Size: SH

    Important: Do not tip the battery more than 40 degrees during removal.

  4. Remove the battery.
Installation Procedure

    Object Number: 289311  Size: SH

    Important: Do not tip the battery more than 40 degrees during battery installation.

  1. Install the battery to the battery tray.

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the battery hold down retainer.

    Tighten
    Tighten bolt to 18 N·m (13 lb ft).