How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask autodoc_2000 Your Own Question
autodoc_2000
autodoc_2000, Auto Technician
Category: Chevy
Satisfied Customers: 2563
Experience:  ASE Master Tech W/Advanced Engine Performance
157591
Type Your Chevy Question Here...
autodoc_2000 is online now
A new question is answered every 9 seconds

HOW DO YOU CHANGE THE THROTTLE SENSOR ON A 1996 CHEVY BLAZER

Customer Question

HOW DO YOU CHANGE THE THROTTLE SENSOR ON A 1996 CHEVY BLAZER
Submitted: 10 years ago.
Category: Chevy
Expert:  autodoc_2000 replied 10 years ago.
REMOVAL PROCEDURE


  1. Remove the electrical connector by releasing the locking tab.
  2. Remove the 2 Throttle Position (TP) sensor attaching screw assemblies. CAUTION : The TP sensor is an electrical component. Do not soak it in any liquid cleaner or solvent because damage may result.
  3. Remove the TP sensor from the throttle body assembly.

INSTALLATION PROCEDURE



  1. With the throttle valve closed, install the TP sensor on the throttle shaft. Rotate counterclockwise in order to align the mounting holes.
  2. Install the 2 TP sensor attaching screw assemblies. Tighten



    • Tighten the screw assemblies to 2.0 Nm (18.0 lb. in.) .


  1. Install the electrical connector.