Ask A Question|Register|Login|Contact Us
JustAnswer

Heavy Equipment

Ask a Heavy Equipment Question, Get an Answer ASAP!

catguru8201, Technician

 
 
 
 
 
 
JustAnswer
93
Satisfied Customers JustAnswer

The Expert's number of “Accepted Answers” is a good indication of how many satisfied customers he or she has helped.

catguru8201's Bachelors of Science in Mechanical Engineering was verified on or about November 2011 by a leading third-party verification service.

View the Terms of Service section on verifications

Offline Now
in Heavy Equipment
 
 
 

Like this Expert? Spread the word!

About catguru8201

5 years of troubleshooting many different Caterpillar equipment models. If you need to know something about a CAT, just ask me!

I've been an Expert on JustAnswer since September 2011, and I’m ready to answer your Heavy Equipment questions.

To date, I have 93 satisfied customers who have indicated that they are happy with the answers they received from me - and I'm ready to answer your Car questions right now.

If you have a Car question you would like to ask me, just enter it into the box on the left so I can get started right away. Your satisfaction is my goal, and I'm happy to answer any follow-up questions you may have.

Note from JustAnswer: catguru8201's Bachelors of Science in Mechanical Engineering was verified on or around November 2011 by a leading third-party verification service.

Recent Feedback for catguru8201 JustAnswer

Feedback represents all the ratings that the
expert has received under the new feedback
system. These are grouped into 5 customer
rating options.

Category:

28
Positive
0
Neutral
0
Negative
Positive
4/2/2012
We will try using the information provided
Positive
2/12/2012
VERY KNOWLEDGABLE AND VERY PATIENT. WILL DO WHATEVER HE NEEDS TO HELP WALK YOU THROUGH YOUR PROBLEM. WILL DEFFINITLY USE AGAIN.
Positive
2/7/2012
Thank you for your help.
Positive
2/2/2012
Great Information as always.
Positive
1/27/2012
thank you for your help. i replaced the hydraulic vane pump and stalled the lift tilt with a reading of 2800 psi.
Positive
1/26/2012
thanks a lot for the help you help me out quickly and efficiently I will use the service again.
Positive
1/25/2012
good service,had connection problems to view response
Positive
1/25/2012
very helpfull
Positive
1/24/2012
Went very well, thank you. Well worth the money!
Positive
1/23/2012
a really big help!
< Previous | Next >
 
 
 
Show: Past 3 MonthsPast 3 Months | Past 12 MonthsPast 12 Months | LifetimeLifetime
 Excellent service
Excellent service
Good service
Good service
OK service
OK service
 
 
 

Recent Answers from catguru8201

 
 
 
generator..3508 Caterpillar diesel engine..engine fan..loosen 3/30/2012
cause an increase in oil level?I just had engine serviced 3/12/2012
9pn, my trans light will blink at me for 3-30 seconds..comes back 3/8/2012
I have a cat 330 bl that is operating slowly"boom bucket stick" 3/1/2012
cat317bl DELIVER AT 160 BAR through auxilliary VALVE FOR attachment 2/27/2012
I have discovered that my Cat 277 skidsteer is not equipted 2/14/2012
rpms drop..2100 to 1500 when boom lift is activated at stockpile 2/14/2012
crank it by applying 12v to the starter soleniod. 2/13/2012
pilot: 2004 cat 304 cr excavator..about 2 mins..either direction 2/10/2012
skid steer..lift..there a load check or something in the control valve 2/8/2012
See All Answers
 
 
 
 
 
 
BBB Accredited - A+ Rating VeriSign Secured
Contact Us | Terms of Service | Privacy & Security | About Us
© 2003-2013 JustAnswer LLC