How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask david craig Your Own Question
david craig
david craig, Auto Mechanic
Category: Car
Satisfied Customers: 2803
Experience:  owner/mechanic at 3D Automotive
4993992
Type Your Car Question Here...
david craig is online now
A new question is answered every 9 seconds

My chysler sebring 2010 wont start and is stuck in park, I

This answer was rated:

My chysler sebring 2010 wont start and is stuck in park
JA: Do you have brake lights? Have any trouble codes popped up?
Customer: I have break lights and the engie light is on
JA: Are you fixing your Sebring yourself? What have you tried so far?
Customer: Yes im in a parkinglot and i tried to push down on the break because the car still says its in reverse
JA: Anything else you want the mechanic to know before I connect you?
Customer: No mam
Customer: replied 7 days ago.
O8

Hi Im David, thanks for visiting the site , with the key on and when you step on the brake pedal do you hear a click down by the shift lever?

Customer: replied 7 days ago.
No I dont hear anything, the car won't start

ok, down on the center console by the shift lever there should be a small square cut out. pry that off and stick a pen or thin screwdriver down in the hole to release the pink(i believe) lever. that should allow you to shift out of park

Customer: replied 7 days ago.
I see the lever put what exactly am I doing pressing it down or pulling it up?

pressing it down. some cars are different and they move to the side.

let me get the procedure

are your lights, radio horn working?

Customer: replied 7 days ago.
Okay I have two pink levers
Customer: replied 7 days ago.
everything is on

ok, standby. im looking for the procedure.

what size engine? 2.7 or 3.5?

Customer: replied 7 days ago.
Okay thank you so much
Customer: replied 7 days ago.
2.7

ok thanks

push rearward on the lever

Customer: replied 7 days ago.
Will I hear a click or a lock? And do I do both?

no you wont hear a click just stick something in from to it and move it rearward.

this might help you.

https://www.youtube.com/watch?v=c6gPDOTiiWo

Customer: replied 7 days ago.
I got the lever in the middle to move but when I put in back park and to try and start the car it won't move again
Customer: replied 7 days ago.
How can I start the car without it being in park?

ok, and you arent hearing the solenoid clicking?

you can try start it in neutral if it goes in neutral?

Customer: replied 7 days ago.
It will go in neutral in the middle but on the dash board it still says reverse.
Customer: replied 7 days ago.
I hear the clicking noise when I try to start it

ok, you have bigger problem than I thought.your shift cable and shifter mechanism are totally out of hack and the shifter mechanism will need replaced and the cable adjusted.

david craig and 2 other Car Specialists are ready to help you

Related Car Questions