How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1081
Experience:  16 years of experience
2499435
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

Jim. In regards to our last conversation, I believe the

Customer Question

Hey Jim. In regards ***** ***** last conversation, I believe the valve body is going bad as well. It hesitates when shifting From park to reverse/drive. Can PO500 or PO720 cause this. I don't believe so. I'm almost ready to put a used trans in after I can confirm Voltages and sine waves at ecm and meter.
Submitted: 4 months ago.
Category: Car
Expert:  Jim replied 4 months ago.

Yes, I haven't seen a hesitation from those codes, usually seen that caused by a worn seal.

Customer: replied 4 months ago.
Thanks for your help!!! Have a Merry Christmas!!!!
Expert:  Jim replied 4 months ago.

You as well.