How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, ASE Certified Technician
Category: Car
Satisfied Customers: 1650
Experience:  Auto Technician
Type Your Car Question Here...
Dan is online now
A new question is answered every 9 seconds

My customer's Toyota wish ZGE20W-HPXSP 2012,have a

This answer was rated:

Hi! Good day my customer's Toyota wish ZGE20W-HPXSP
2012,have a diagnostic fault code B1821 come on board.after I used the scanner OBD2 to clear the code,then it come again
(Open in side squib SRS airbag (RH)circuit,
Then what should I do?

Hi Im DAVID, B1821/55• The center airbag sensor assembly receives an open circuit signal in the side squib (Driver seatside) circuit for 2 seconds• Side squib (Driver seat side) malfunction• Center airbag sensor assembly malfunction• No. 2 floor wire• Front seat with adjuster frame assembly RH (Sidesquib (Driver seat side))• Center airbag sensor assembly

When DTC B1821 is output. CHECK NO. 2 FLOOR WIRE (FOR OPEN)

Customer: replied 5 months ago.
Need to disconnect the negative (-) terminal cable from the battery or not?


checking in to see how its going

I am contacting you because the post has not been closed or rated.

This question will close after 7 days.

You have already paid to get this question answered, but you have not rated.

Let me help some more. Is there anything else I can help you with?

Customer: replied 5 months ago.
Hi thanks for reply me !
A bit dissatisfied about the minor problem!i
"Disconnect the battery terminal"
Very minor matter!
So !friends!
This is a very important things that if you want to guided someone to done the real way!
Not a professional answer!
I can paid !
But at least you done the right way!
Customer: replied 5 months ago.
I can tell you!
I have already solved my phonlemm!
But not you advised me!����������
Customer: replied 5 months ago.
I am also not very professional machanic!
But don't try to tell something's and then hide somethings behind I can paid !
Customer: replied 5 months ago.
Now I dissatisfied the first machanic advised me not a professional answer to me !
Told something hide something!
I can paid the amount you charge me!
I won't regret!

I am sorry you are not happy with the first answer, but I am glad you were able to solve the problem. Is there anything else you need help with so that you are happy with the site?

Customer: replied 5 months ago.
Thanks Dan,yes I am happy with the site,this is my second question on this site ,the first question I have rated the expert 5 start,but this question I won't rate,thanks Dan,maybe next times I have any questions I will request you.this file I think better close!

OK thank you for using the site to ask your question.

You left a negative rating, I understand you are not happy, and I tried to do my best to help so I am unsure why you left me a bad rating. How can I help you have a positive experience using the sight?

Dan, ASE Certified Technician
Category: Car
Satisfied Customers: 1650
Experience: Auto Technician
Dan and 7 other Car Specialists are ready to help you