How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, ASE Certified Technician
Category: Car
Satisfied Customers: 1561
Experience:  Auto Technician
94707146
Type Your Car Question Here...
Dan is online now
A new question is answered every 9 seconds

Need to remove blower assembly to replace air mode control

This answer was rated:

need to remove blower assembly to replace air mode control cable
JA: How long has this been an issue? How many miles are on the car?
Customer: 90000 recent problem had repaired at dealer once but cable has failed again
JA: What is the model/year of your Toyota?
Customer: 2008 scion xd 5 speed manual
JA: Are you fixing your xD yourself? What have you tried so far?
Customer: yes identified bad cable and ordered remove panels to see what needs to be done
JA: Anything else you want the mechanic to know before I connect you?
Customer: no

Hello my name is***** am an ASE Master Technician and I am glad to help you out with your question.

REMOVAL [ FRONT BLOWER MOTOR ]

  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
  2. REMOVE FRONT BLOWER MOTOR
    1. Disconnect the connector and clamp.
    2. Remove the 3 screws and the blower motor.

      Fig 1: Locating Front Blower Motor Screws

      Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Please reply to this if you need more help and we can continue this conversation at no extra charge. This does not have to be my only answer. If you are satisfied with my service, please rate at the top of the screen. Rating does not close out your question. Remember, sometimes it is difficult to completely diagnose your vehicle without being there, but I will try to give you the best answer I can. Hoping to be giving you 5 star service.

Thanks

Customer: replied 3 months ago.
I need to remove the whole assembly, which includes the filter housing. I am trying to replace part(###) ###-####air mode control cable. I need to remove the housing to reach the connection point for the cable.

I can email you the repair manual. Click "enter contact info" below the chat window, then enter your email. I will send you the file as it is quite large.

Dan and 5 other Car Specialists are ready to help you