How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Car
Satisfied Customers: 21591
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I disconnected and reconnected my battery and now my level

Customer Question

I disconnected and reconnected my battery and now my level fault light is on
Submitted: 2 months ago.
Category: Car
Expert:  Kevin replied 2 months ago.

Hi I'm Kevin why was battery disconnected and is suspension level ?

Customer: replied 2 months ago.
The cable was loose, so I took it off and reconnected it and tighten the nut.
Customer: replied 2 months ago.
Before I took the cable off, the car was running fine and had no warning lights on.
Expert:  Kevin replied 2 months ago.

Ok and when you disconnected battery where was key ?

Customer: replied 2 months ago.
In my pocket
Expert:  Kevin replied 2 months ago.

Ok and how long had ignition been off for between parking and removing battery lead

Customer: replied 2 months ago.
About 3 days
Expert:  Kevin replied 2 months ago.

Oh ok thats good .the suspension system has obviously got upset with voltage being removed .is it on level ground ? Is suspension level ? Have you driven car ?

Customer: replied 2 months ago.
The suspension is ground level. I have not Driven the car
Expert:  Kevin replied 2 months ago.

So its gone totally down ?

Customer: replied 2 months ago.
Expert:  sprinkles08 replied 1 month ago.

Hello and welcome to JustAnswer!

Unless there is physical damage to a component that you can locate visually then a scan tool is going to be necessary to begin diagnosis of the warning.

Do you have a scan tool to see what suspension related fault codes have set?

Related Car Questions