How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Technician
Category: Car
Satisfied Customers: 6810
Experience:  17 years Shop Owner /Technician. 27 years experience,
29331485
Type Your Car Question Here...
Greg is online now
A new question is answered every 9 seconds

I am looking for Suzuki Mechanic with a lot of knowledge

Customer Question

I am looking for Suzuki Mechanic with a lot of knowledge with a 2008 XL7 LIMITED 3.6
Codes for throttle position sensor on the pedal
Replaced this pedal sensor and replaced throttle body Also code will not clear in which causing illuminating engine light.
causing reduce power failure / no pedal acceleration/
stability control lost /etc
Any ideals how to clear these codes
Any way to reset EMC
Thinking EMC needs to be reprogrammed
Submitted: 2 months ago.
Category: Car
Expert:  Greg replied 2 months ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 2 months ago.

Hi .

Can you get me the malfunction code.

Greg

Customer: replied 2 months ago.
2S3DB917086125385 VIN #2008 Suzuki xl7 Limited 3.6
Expert:  Greg replied 2 months ago.

Need the malfunction code that is keeping the check engine light ON .

Greg

Customer: replied 2 months ago.
Po 123
Po 223
But its not the trotttlle body position sensor something eles is causing this problem and voltage is stable.
Expert:  Greg replied 2 months ago.

okay great will get back to you.

Greg

Expert:  Greg replied 2 months ago.

Do you have a scan tool with live date .

If yes check TPS 1 and 2 voltage should not be over 4.6 volts .

Greg

Expert:  Greg replied 2 months ago.

The following has to be meet for an automatic self relearn .

Accelerator pedal must be at14.9% or less or will not relearn. You will have to check the pedal sensor .

If original parts where not used this could also be your problem .live data .

WOT you should have (TP1)4.9 volts Closed throttle you should have (TP2) 4.9volts

If outside this voltage check wiring connections and installation of APP and throttle body .

All parts OEM then check the voltage in

The P0123 and P0223 are codes for short to voltage .

If all checks out correct you will need to have the ECM reflashed .

Need further assistance with this issue then please get back to me with the reply box below .

After rating there is no further cost for any other question relating this issue .

Kind regards Greg

Related Car Questions