How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1044
Experience:  16 years of experience
2499435
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I change both camshaft sensor, but follow the check engine

Customer Question

Hi Kevin I change both camshaft sensor, but follow the check engine on and my scanner show me code P0340 camshaft position sensor A circuit 1 bank. What is the problem then?
Submitted: 3 months ago.
Category: Car
Customer: replied 3 months ago.
What is this?
Customer: replied 3 months ago.
I don't speak English. I can read or write only
Expert:  Kevin Bourcier replied 3 months ago.

it is a link that will open and give you the full procedure to check the wires that lead to the cam sensors . If you changed the cam sensors and have a DTC then that would indicate that you have an " open " or " shorted " wire . This chart will show you what to check and how to check it .

Expert:  Kevin Bourcier replied 3 months ago.

okay , wait sorry the link did not send correctly . I apologize .

Expert:  Kevin Bourcier replied 3 months ago.

this should be right

Customer: replied 3 months ago.
Ok, I will check the wires then. Thank you for your help.
Expert:  Kevin Bourcier replied 3 months ago.

okay . Sounds good