How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1081
Experience:  16 years of experience
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

Have no fire oncoil output, put in new coil and ignition

Customer Question

Have no fire oncoil output, put in new coil and ignition control module in distributor am thinking it is crankshaft sensor and or camshaft sensor 1993 Chrysler Lebaron 3.0L motor help
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: No No
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: new coil new ignition module checked ignition relay under dash behind fuse panel
JA: Anything else you think the mechanic should know?
Customer: I have color codes for wiring harness connection have not run test on these yet
Submitted: 5 months ago.
Category: Car
Customer: replied 5 months ago.
where is crankshaft sensor located
Expert:  K. Wiggins replied 5 months ago.

The crank sensor is located in the distributor. IT's an optical type pick up.

Have you verified that there is 12 volts at the coil + terminal while cranking?

I'll post the system info below, let me know how I may help further