How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Technicaldan Your Own Question
Technicaldan
Technicaldan, Technician
Category: Car
Satisfied Customers: 104
Experience:  Accredited
94166128
Type Your Car Question Here...
Technicaldan is online now
A new question is answered every 9 seconds

Maserati 2007 is turn no start what is problem

Customer Question

Maserati 2007 is turn no start what is problem
Submitted: 10 months ago.
Category: Car
Expert:  Lou P. replied 10 months ago.
Hello, reasons for a no start can be failed crank sensor or camshaft position sensorbad fuel pumpfailed ecmno start authorization from failed ignition key or ignition switchneed to figure out if the engine is missing fuel or spark, if the engine runs on starter fluid then the engine is missing fuel, if it does not run on starting fluid then the engine is missing spark , if you have a code reader to check fault codes that would be the best to know what path to take for diagnosis. hope this helps, Lou P. Please take a second and click the stars at the top of the screen to rate me so i may receive my credit , 5 stars is ideal , please request me in the future.Keep in mind then when you rate it does not end our conversation. you can still return here to me for follow up information if needed, Lou P.
Customer: replied 10 months ago.
Maserati ing
Expert:  Lou P. replied 10 months ago.
OK did you see my information?
Customer: replied 10 months ago.
but maybe authorization is failed how I know authorization failed
Expert:  Lou P. replied 10 months ago.
if you have more than one key try both keys. if not then see if the engine will run off of starter fluid, if it does then that can mean the computer is not letting fuel spray.
Customer: replied 10 months ago.
I don't have the computer
Expert:  Lou P. replied 10 months ago.
i mean the engine computer inside the car. do you work on cars yourself or no?
Customer: replied 10 months ago.
Expert:  Lou P. replied 10 months ago.
ok, so do you know how to spray starter fluid into the intake to see if the engine will run?
Customer: replied 10 months ago.
I spray no start
Customer: replied 10 months ago.
You can tell me how to spray starter fluid
Expert:  Lou P. replied 10 months ago.
ok, you need to remove whatever intake rubber boots are there and spray a few shots of starter fluid into the intake throttle opening and then crank the car to see if it startswhat model maserati do you have?
Customer: replied 10 months ago.
Quattro potter
Expert:  Lou P. replied 10 months ago.
ok this is how your engine looks correct?
Customer: replied 10 months ago.
same
Expert:  Lou P. replied 10 months ago.
OK, let me know if it starts or not on fluid when spraying into the center throttle body,.
Customer: replied 10 months ago.
No start
Expert:  Lou P. replied 10 months ago.
ok so we do not have spark, that tells me that it can be a crank sensor , cam sensor, or drive authorization issue, now you will need a scanner to check for rpm . and also start authorization, if you do not have this then it will have to be done at a shop.
Customer: replied 10 months ago.
I need one scanner u can help me find
Expert:  Lou P. replied 10 months ago.
is this your car or are you fixing it for someone?
Customer: replied 10 months ago.
Ok how I can find
Expert:  Lou P. replied 10 months ago.
is this your car or are you fixing it for someone?
Expert:  Lou P. replied 10 months ago.
how much are you ok with spending?
Customer: replied 10 months ago.
Tell me
Expert:  Lou P. replied 10 months ago.
https://www.autoenginuity.com/order-online/vm-scantool2.html
Expert:  Lou P. replied 10 months ago.
that may work but not sure of all the functions.
Customer: replied 10 months ago.
How much money I can buy one scsnner
Expert:  Lou P. replied 10 months ago.
DID you check my link?
Customer: replied 10 months ago.
I no see your link
Expert:  Lou P. replied 10 months ago.
https://www.autoenginuity.com/order-online/vm-scantool2.html
Customer: replied 10 months ago.
Ok l see how much money
Expert:  Lou P. replied 10 months ago.
OK,.
Customer: replied 10 months ago.
Hi Lou P. Now alarm on how to put off
Customer: replied 10 months ago.
Let the sign
Customer: replied 10 months ago.
Sign the lock how put it on
Expert:  Lou P. replied 10 months ago.
oh the lock is showing in the dash?? that means that it is a security issue.
Expert:  Lou P. replied 10 months ago.
i will have to opt out maybe another expert has more experience in this than me.
Customer: replied 10 months ago.
Ok thanks
Customer: replied 10 months ago.
U know one
Expert:  Technicaldan replied 10 months ago.
I would maybe take your key to a local auto key shop and ask them to see if the transponder or transmitter is still working, if the key is not working then you will need a replacement and it would need to be programmed by a specialist.If the key is working and you still have security issues, other than checking the basics like fuses and battery voltage, you would need specific diagnostic equipment to be able to identify the specific fault with the immobiliser, even if you could read the coded with a basic scanner, it is unlikely that it would let you program the security systems.In short, it appears to be a immobiliser issue, if the key is faulty you may be able to order a new key and have it programmed, if not you will need diagnostic equipment and security access at a dealer level to resolve it.If you have access to an ecu repair specialist, some are able to disable the immobilisers on the ecu using something called bdm depending on which ecu type your car uses.I fear there is little people can do 'online remotely' to assist you.

Related Car Questions