How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Car
Satisfied Customers: 22135
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I have a 2004 Hyndai Triburon select shift that I have put a

Customer Question

I have a 2004 Hyndai Triburon select shift that I have put a used transmission and new neutral safety switch and a input and output
JA: Thanks. Can you give me any more details about your issue?
Customer: speed sensors and its want shift out of 2nd gear it want shift out of 2nd gear
JA: OK got it. Last thing — Auto Mechanics generally expect a deposit of about $24 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Car
Expert:  K. Wiggins replied 1 year ago.

Hello, have you been able to pull any diagnostic codes?

Customer: replied 1 year ago.
Customer: replied 1 year ago.
ok
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

It sounds as if the trans is in limp in. If the trans controller isn't awake or it see a problem that will prevent proper operation then you will be locked in second gear.

Is the TCM functional, and if so what fault codes are setting in it?

Customer: replied 1 year ago.
2004 Hyndai Triburon Automatic Shift
the fault codes are ECM ECU
Expert:  sprinkles08 replied 1 year ago.

What P codes are setting in the TCM?