How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Car
Satisfied Customers: 22114
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

No nothing was done I changed the solenoid twice but the

Customer Question

no nothing was done I changed the solenoid twice but the first time it was a old one but did the same,this time it is a new one but stil wont disengage.
Submitted: 1 year ago.
Category: Car
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to Justanswer!

If you remove the red/blue wire from the solenoid does the starter disengage?

Customer: replied 1 year ago.
It does not disengage
Customer: replied 1 year ago.
Expert:  sprinkles08 replied 1 year ago.

Can you upload a picture of how you have the cables arranged on the solenoid?

Customer: replied 1 year ago.
I am trying to upload
Customer: replied 1 year ago.
It says unknown error
Customer: replied 1 year ago.
Did you get it...?
Expert:  sprinkles08 replied 1 year ago.

I think you have a red and a black cable swapped. The black cable that is stacked up with the others goes to the starter, correct? That cable should be on one side by itself, the others are stacked together on the opposite post.

Customer: replied 1 year ago.
No i it is the starter,do you know the correct size starter for the for explorer 1991 xl 2 door manual transmition,because now i have a from a automatic trans its bigger
Expert:  sprinkles08 replied 1 year ago.

The starter can't cause itself to run constantly. Is that not what you're currently trying to repair?

Related Car Questions