How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike V. Your Own Question
Mike V.
Mike V., Auto Service Technician
Category: Car
Satisfied Customers: 23837
Experience:  25 years of experience, Certified Subaru Technician and Nissan factory trained.
2921078
Type Your Car Question Here...
Mike V. is online now
A new question is answered every 9 seconds

Have a 2006 Pontiac Montana - 2 wheel dr - 3.5L engine.

Customer Question

Have a 2006 Pontiac Montana -*****- 3.5L engine. Replacing front wheel & hub Assy.
Followed the instruction in Chilton manual. Have the hub loose but can't pull it all the way off the spline. I have tried a puller, a slide hammer, a 3 lb hammer. In desperation I hooked up a puller and chain to a hydraulic jack and all I did was move the whole car. Please is there anyone who can tell why the hub will not come off. I have repeated the removal instruction from the book 5 time just to make sure I haven't missed any steps.
Thanks
Submitted: 1 year ago.
Category: Car
Expert:  Mike V. replied 1 year ago.

Hi there, Can you possibly send a photo?
Are you stuck on the axle shaft or in the spindle assembly?

Expert:  Mike V. replied 1 year ago.

Hello, do you still need assistance with this?

Related Car Questions