How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott W. Your Own Question
Scott W.
Scott W., ASE Certified Technician
Category: Car
Satisfied Customers: 3286
Experience:  28 yrs. experience in automotive repair
Type Your Car Question Here...
Scott W. is online now
A new question is answered every 9 seconds

Ford Ford: Hi ford Taurus 1996 3.0L DOHC steering pump is

This answer was rated:

ford Taurus 1996 3.0L DOHC steering pump is leaking from pressure side nut but I cannot get spanner in to loosen or tighten (is it 17or 18mm nut?) should I remove the 3 mounting bolts to get access do I have to remove pulley to remove 3 mounting bolts

Hello my name is XXXXX XXXXX is power pump removal, you will need a puller to remove and a installer to remove and install the pulley, you can then access the mounting bolts and remove the pump if needed to access the ps line. Should be 18 mm wrench if the line is factory.


PS pump removal click here

Scott W. and other Car Specialists are ready to help you