How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Car
Satisfied Customers: 30559
Experience:  Automotive Repair Shop Manager, Technician/JA Mentor
3195632
Type Your Car Question Here...
Eric is online now
A new question is answered every 9 seconds

chev alumina z34: how do i remove the passenger side seat on

Customer Question

how do i remove the passenger side seat on a 1992 alumina z34 hard top
Submitted: 3 years ago.
Category: Car
Expert:  Eric replied 3 years ago.
Hi,

REMOVAL & INSTALLATION



Front

See Figure 1




Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here
View Full Image

Attachments are only available to registered users.

Register Here


Fig. Fig. 1: Front seat attaching points

  1. Operate the seat to the full-forward position (full-forward and full-up if six way power seat).
  2. Remove the track covers and front anchor bolts.
  3. Operate the seat to the full-rearward position.
  4. Remove the rear anchor bolts.
  5. Unplug the electrical connectors (six way power seats).
  6. With an assistant, lift the seat out of the vehicle making sure the spacer washers remain in place.

Be careful not to damage the interior and painted surfaces when removing the seat assemblies.

To install:
  1. With an assistant, install the seat assembly into place and make sure the spacer washers are located between the floor pan and seat tracks.
  2. Engage the electrical connectors (six way power seats).
  3. Install the rear anchor bolts and tighten to 18 ft. lbs. (24 Nm).
  4. Operate the seat to the full-forward position.
  5. Install the front anchor bolts and tighten to 18 ft. lbs. (24 Nm).
  6. Install the track covers and check for proper operation.
Expert:  Eric replied 3 years ago.
I noticed we have not yet resolved your concern you asked about. I would sure appreciate it if you would reply so I can offer my skills and knowledge and repair guide access to help as best I can.


~Do you still need more help?
~Confused by my info request or answer?
~Need more time?
~Confused on how the site works?
~Need more detail or a different explanation?


If the answer is YES to any of these just press reply and lets work on this concern some more.


If you have already rated my answer, then Thanks alot. If you have new questions now or in the future please do not hesitate to ask them. If you would like me to assist you. Just bookmark this page so you can access my profile easy and post a new question from the question box on my profile page.