How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Master Tech Lee Your Own Question
Master Tech Lee
Master Tech Lee, ASE Master Tech
Category: Car
Satisfied Customers: 582
Experience:  36 years Domestic and Import Electronics Diagnostic Tech
Type Your Car Question Here...
Master Tech Lee is online now
A new question is answered every 9 seconds

No start . I Change ,Igniter,Ignition coil, also I found out

This answer was rated:

No start . I Change ,Igniter,Ignition coil, also I found out No electrie vollltage in ignition coil so How do I start engine

Leon Davidian, Sr. :

Welcome to My name is XXXXX XXXXX online automotive technician. I am reading your comments. I will be right with you. Thank You, Leon

Leon Davidian, Sr. :

Year, Make, Model, and engine size please

JACUSTOMER-69s818ms- :

1997 ,mitsubishi 3000 GT ,3.0 DOHC

JACUSTOMER-69s818ms- :

I have some internet trouble may I contect tonight 7 PM.?

Master Tech Lee and 6 other Car Specialists are ready to help you
Through this channel. We are not allowed to call customers, sorry.
Customer: replied 3 years ago.

I was computer problem,If you know (3000 GT 97 3.0 DOHC)

Customer: replied 3 years ago.

I was computer problem, If you know problem, please answer me ?

Customer: replied 3 years ago.

I was computer problem,If you know (3000 GT 97 3.0 DOHC) please answer me, now my computer ,OK

Ok, Sorry for the delay my computer was shut down due to a bad virus I am 50 percent running. I just want to touch base with you.

Reading your question you are having a computer problem? Exactly what kind of problem are you having? Code numbers? What computer problem are you having?


Customer: replied 3 years ago.

MR. Davidian, my car (Mitsubish,GT 3000,DOSCH 3.0 ) No start engine , I
change inginiter sensor, ingintion coil. .I checked fuel pump is good and
no voltage at two wire conection to the ingintion coil .My questin is why
no voltage coil I think that way no start engine .When I starting engine
cranking sound is good but seems like no spark.

OK, Thank you for clarifying; I am going to the pro manuals and look at the wiring schematic to see what I can come up with.

I need you to check, at TDC on compression stroke, to see if rotor is pointing at number 1 post from distributor cap?



Test at the coil connector, per diagram, and tell me what voltage you are getting?










Related Car Questions