How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ridgerunnerras Your Own Question
Ridgerunnerras
Ridgerunnerras, Auto Mechanic
Category: Car
Satisfied Customers: 602
Experience:  I have been fixing cars for 26 years for myself and at a used Car dealer. I am skill mechnical and autobody and paint repair
54869360
Type Your Car Question Here...
Ridgerunnerras is online now
A new question is answered every 9 seconds

after replacing passenger side cv boot axle saver nocking on driver si

This answer was rated:

after replacing passenger side cv boot axle
saver nocking on driver side

Hello I would like to help you with this.

When you're replaced the boot was the CV joints still full of grease?

How long had the boot been broken and was grease sprayed up inside the wheel well?

It is possible that you may have a bad CV joint due to losing Grease, or something maybe rubbing on a part of the suspension in the area that you're working on.

Please check and let me know

Ridgerunnerras and 7 other Car Specialists are ready to help you
Customer: replied 3 years ago.

I didn't notice any grease inside the wheelwell. After replacing cv boot joint axel on passenger side, now there is a knocking noise on the driver side. So I replaced the cvboot joint axel on the driver side. Also the wheel bearing, tie rod, struts, motor mounts and still have a noise while driving. Seems like wheel is bouncing.