How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, Technician
Category: Car
Satisfied Customers: 15575
Experience:  GM master tech for 15 years/ASE master tech for 20 years
Type Your Car Question Here...
Gary is online now
A new question is answered every 9 seconds

how do i remove the rotor after removing the distributor cap

This answer was rated:

how do i remove the rotor after removing the distributor cap on a 4 cyl, isuzu rodeo.
can you tell me what year this Isuzu Rodeo is ?
Customer: replied 3 years ago.
sorry, 1992
ok once the cap is off looking at the side of the rotor exact opposite side of the rotor tip so to say there should be a 8 mill little screw holding it to the shaft. Remove that screw and then remove the rotor
Gary and 5 other Car Specialists are ready to help you
Customer: replied 3 years ago.
a 1992 isuzu rodeo
remove the cap and the rotor is held to the shaft with an 8 mil screw remove that screw and slid the rotor off
Customer: replied 3 years ago.
thank you, ***** ***** sense, the new rotor did not have a screw in the box.
anytime thank you for using justanswer