How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Car
Satisfied Customers: 15154
Experience:  30 YRS EXPERIANCE, AUTO AND TRUCK,FOREIGN AND DOMESTIC, GAS AND DIESEL
17454363
Type Your Car Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

Suzuki grand vitara: (2-door, 4wd, 4cyl 1.6(m16a) dohc 16 valves..vin

Customer Question

I have to replace my rack and pinion of my Suzuki grand vitara (2-door, 4wd, 4cyl 1.6(M16A) DOHC 16 valves) and want to make sure I order the right part. Can I buy any rack and pinion that says that it fits a Suzuki Vitara 2007? Or do I need to check it against the VIN? The car was bought in Haiti and probably imported from Japan or Canada (KM instead of miles). Where could I order the correct part online?
Submitted: 4 years ago.
Category: Car
Expert:  Tim Mohr replied 4 years ago.
Hi, my name is Tim, is this aleft hand drive, or a right hand drive?
Customer: replied 4 years ago.
Right hand drive, manual
Expert:  Tim Mohr replied 4 years ago.
then any rack and pinion from a grand vitara in 2007 will fit this, but not the XL-7, only the grand vitara,Tim