How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Nova Your Own Question
Dave Nova
Dave Nova, ASE Certified Tech
Category: Car
Satisfied Customers: 19451
Experience:  ASE Master Certification. GM World Class Certification
Type Your Car Question Here...
Dave Nova is online now
A new question is answered every 9 seconds

pickup: anyone know if the cpp Power Steering Kit

Customer Question

Does anyone know if the CPP Power Steering Kit for the 66 chv pickup will work on a 250 6 banger?
Tom Pitts
Submitted: 5 years ago.
Category: Car
Expert:  Dave Nova replied 5 years ago.
Hello and thank you for using justanswer.

CPPs kit is designed for use with a V8 engine. The mounting location for the pump on the 6 cylinder is similar, so the hoses can be used, the steering gear box is not a problem. You will need a different set of mounting brackets to attach the power steering pump to the engine. If your engine has a single lower pulley on the crankshaft you will also need to add a double pulley. There are kits available for the 6 cylinder trucks, click here.
Dave Nova and other Car Specialists are ready to help you
Customer: replied 5 years ago.

None needed I have the parts in hand.

Not rear certain about mounting but will figure out when I get to it in a couple weeks.


Expert:  Dave Nova replied 5 years ago.
Thanks for the update.
Customer: replied 5 years ago.


I accept already

Where the heck is the accept button.

I tried clicking on accept in the memo


Expert:  Dave Nova replied 5 years ago.
You did already accept the answer . Thank you again for using justanswer.