How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Auto Service Tech
Category: Car
Satisfied Customers: 29428
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Car Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

how to reset anti theft after replacing steering colum

Customer Question

how to reset anti theft after replacing steering colum
Submitted: 4 years ago.
Category: Car
Expert:  GM Tech (Cam) replied 4 years ago.
Hello, I'm Cam. Please include all the details about your issue so I can accurately advise you. I cannot see your vehicle so please be detailed.
The relearn procedure is as follows. Turn the key on and try to start the engine. Allow the engine to stall while leaving the key in the run position. Wait 10 minutes. Turn the key off for 30 seconds. Then try to start the engine again, again releasing key to run and starting the timer for 10 minutes. Do this one more time, for a total of 30 minutes. Following the last off time, the engine should start.
GM Tech (Cam) and 3 other Car Specialists are ready to help you
Customer: replied 4 years ago.
cam,the light was flashing before i put the new colum in but you try to start it and there nothing in the start postion.
Expert:  GM Tech (Cam) replied 4 years ago.
Can you see then if the yellow wire gets power with the key in crank?

Related Car Questions