I'm Neal and I am here to assist you. Only accept when you are happy with my assistance. If I can't help I will open your Question to other experts.
If the fuses and harness is good and the ecm is getting power then yes, that sounds like the ecm. It is also not that unusual on those.
Where is the ECM located and what color is the wire to check if I am getting power to ECM?
Here you go, these are the connector views.
If C51-2-20 and C51-2-21, have 10- 14 volts with the key on, would that mean the ECM is bad?
I meant to ask if those circuits have full voltage, but I am not getting the pulse at the injectors, the spark at the plugs and no power to the fuel pump, would that mean the ECM is bad?
If the ECM is bad, can I just buy new ECM and install it or does it have to go to the dealer for programming?
Thanks for your help. Going to find ECM.