How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randy Your Own Question
Randy
Randy, Auto Specialist
Category: Car
Satisfied Customers: 9620
Experience:  25 Years Experience Automotive Technology.
62741268
Type Your Car Question Here...
Randy is online now
A new question is answered every 9 seconds

2004 model..the Head,big end bearings, and the cam bolts

Customer Question

tata indica 2004 model 1.4i . i am looking for the torque settings for the Head,big end bearings, and the cam bolts.
Submitted: 5 years ago.
Category: Car
Expert:  Randy replied 5 years ago.

Randy :

Hello!

Randy :

I will assist you,

Randy :

CYLINDER HEAD BLOTS- STEP 1-TIGHTEN TO 49 N.M, STEP 2-THEN TIGHTEN ADDITIONAL 90 DEGREES

Randy and 2 other Car Specialists are ready to help you
Customer: replied 5 years ago.
Relist: Incomplete answer.
I asked for the Head bolts,big end bearings, and the Cam bolts
But i only received head bolts answer, still need big end bearings and the cam bolts
Expert:  Randy replied 5 years ago.
Sorry for delay, I am still uploading diagrams,

Attachment: 2011-12-06_084252_mains1.pdf

MAIN BEARINGS-
STEP 1-22 N.M
STEP 2- 43 N.M
STEP-3- ADDITIONAL 45 DEGREES
STEP -4-ADDITIONAL 45 DEGREES
Expert:  Randy replied 5 years ago.
CAMSHAFT-

Attachment: 2011-12-06_084951_cam1.pdf

TIGHTEN BOLTS ON FRONT TO 23 N.M
TIGHTEN ALL OTHER CAM BOLTS TO 13 N.M

__________________
NOTE: Click the Accept Answer button when you are satisfied and I will be paid for my time. Clicking ACCEPT does not cost you anything extra. Thank You Very Much!!

Thank You! If I can be of further assistance PLEASE let me know! PLEASE click on Answer Accepted button! POSITIVE FEEDBACK Appreciated!!

Customer: replied 5 years ago.

Please can you send big end bearings and not main bearings!!

It is a 8 valve and not 16 valve, the above is for 16 valve?

Customer: replied 5 years ago.
I am still waiting for the big end bearings!!!!
Customer: replied 5 years ago.

Please can you still help us, its not a indica, but the Indigo 1.4 gls 2004. Please we need the torque settings for head bolts, big end bearings and cam bolts.

Please can you help us

thank you......

Expert:  Randy replied 5 years ago.
BIG END BEARINGS ARE 19 N.M
Customer: replied 5 years ago.

Will this now be for the Indigo, as we had it wrong (we told you earlier that its a Indica)

Will all the above settings for the Indigo??

Expert:  Randy replied 5 years ago.
Hello! I will make sure for you, Give me a moment.
Sealed

Laughing
Customer: replied 5 years ago.

Morning Randy,

Will all the above settings work for the Indigo? you said yesterday that you will come back to me? Still waiting....

 

 

Expert:  Randy replied 5 years ago.
Can you view document, I uploaded document last night. It on post above.
If you have trouble viewing let me know.
Expert:  Randy replied 5 years ago.
On the above attachment it list all torque specifications,One note to remember, the crankshaft cap bearings on the end(big end bearings) are 50 N.m then 45° then 15°.The center caps are 37 N.m then 45° then 15°.All of the specs are in attachment.
Customer: replied 5 years ago.
Thank you, XXXXX XXXXX the document!
Expert:  Randy replied 5 years ago.
Your welcome!