How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask wild west auto Your Own Question
wild west auto
wild west auto, master technician
Category: Car
Satisfied Customers: 112
Experience:  ase master certified ,blue oval certified,
Type Your Car Question Here...
wild west auto is online now
A new question is answered every 9 seconds

How do you replace the kickdown cable on isuzu auto tranmission

Resolved Question:

How do you replace the kickdown cable on isuzu auto tranmission
Submitted: 4 years ago.
Category: Car
Expert:  wild west auto replied 4 years ago.

JACUSTOMER-xr2s183o- :

hello i can give you step by step directions or simple instructions which do you perfer?


step by step

JACUSTOMER-xr2s183o- :

be right back with that for you

Expert:  wild west auto replied 4 years ago.
. Drain transmission fluid, then remove oil pan and screen.
2. Disconnect oil pipe by raising slightly with a screwdriver.
3. Remove valve body attaching bolts. Mark location of attaching bolts to ensure correct position during installation.
4. Lower valve body slightly, then disconnect throttle valve control cable from throttle cam.
5. Remove valve body from transmission.
6. To install, connect throttle valve control cable to throttle cam, then align manual valve with pin on valve lever.
7. Install valve body and torque attaching bolts to 5.8-8.7 ft. lbs.
8. Install oil pan screen and torque attaching bolts to 3.6-4.3 ft. lbs.
9. Install oil pipes, then the oil pan. Torque oil pan attaching bolts to 2.9-3.6 ft. lbs.
10. Add transmission fluid as specified and check for proper operation.
wild west auto and 7 other Car Specialists are ready to help you

Related Car Questions