How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve
Steve, ASE Certified Tech
Category: Car
Satisfied Customers: 6913
Experience:  25 years working as a service technician
43460220
Type Your Car Question Here...
Steve is online now
A new question is answered every 9 seconds

03 plate..me know if you need a bearing puller and a press..diy

This answer was rated:

i have discovery 2, 03 plate could you let me know if you need a bearing puller and a press to change the front discs or is it straight forward for a competant diy'r

Steve :

Hello and Welcome to Justanswer, My name is XXXXX XXXXX I am here to try and assist your with your question

Steve :

are you replacing the rotor or the bearing?

Customer:

no brake discs and pads only

Steve :

then the rotor should falloff no press

Steve :

may need to remove a hold down screw in the rotor

Customer:

any specialised tools needed

Steve :

no just need to remove the hold down screws may require torx bit

Customer:

many thanks

Steve :

your welcome

Steve :

please hit the green accept button so i may get credit thanks

Steve and 4 other Car Specialists are ready to help you

Related Car Questions