How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SNAPONTECH Your Own Question
SNAPONTECH
SNAPONTECH, Technician
Category: Car
Satisfied Customers: 3803
Experience:  2 year Associate in Applied Arts and Sciences Degree in Automotive Repair Technology
49697172
Type Your Car Question Here...
SNAPONTECH is online now
A new question is answered every 9 seconds

Freelander TD4 how to change front nearside CV joint

Resolved Question:

freelander TD4 how to change front nearside CV joint
Submitted: 5 years ago.
Category: Car
Expert:  SNAPONTECH replied 5 years ago.

SNAPONTECH :

Welcome to Justanswer

Customer:

could you explain how to remove the drive shaft

SNAPONTECH :

Yes

Customer:

could you explain how to remove drive shaft

SNAPONTECH :

Did you get the steps

Customer:

no

SNAPONTECH :

Full Size Image

SNAPONTECH :

Full Size Image

SNAPONTECH :

click on the images

SNAPONTECH :

if this was helpful please take a moment to kindly press ACCEPT. Kind regards Danny

Customer:

how do you remove drive shaft

SNAPONTECH :

I sent you the steps you have to click on the pages

SNAPONTECH and 3 other Car Specialists are ready to help you
Expert:  SNAPONTECH replied 5 years ago.

JACK UP THE CAR REMOVE THE WHEEL THEN REMOVE THE BRAKE CALIPER NOW REMOVE THE LARGE NUT ON THE SHAFT TAKE OFF THE NUT THAT ATTACHES THE WHEEL HUB ASSEMBLY REMOVE THE TIE ROD THEN YOU SHOULD BE ABLE TO PULL THE CV AXLE FROM THE HUB NOW YOU HAVE TO POP IT OUT OF THE TRANSMISSION.

 

Thats generic steps if you click on the images sent you will see the steps for your vehicle. Thanks

 

Danny