How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff
brownjeff, ASE Certified Technician
Category: Car
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
11021861
Type Your Car Question Here...
brownjeff is online now
A new question is answered every 9 seconds

how do you bleed the clutch slave cylinder

This answer was rated:

how do you bleed the clutch slave cylinder
Hello and Welcome to JustAnswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

  1. Set parking brake.
  2. Check level of clutch fluid in reservoir and replenish as necessary.
  3. Connect a vinyl tube to bleeder screw and insert opposite end into a transparent container.
  4. Pump clutch the clutch pedal several times, then hold pedal depressed.
  5. Loosen the bleeder to release clutch fluid with air bubbles into the container, then tighten bleeder screw. Do not release clutch pedal until bleeder screw has been tightened.
  6. Repeat Steps 4 and 5 until no air is seen coming out of vinyl tube. During bleeding operation, ensure reservoir is kept full at all times.
brownjeff and 6 other Car Specialists are ready to help you