How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1044
Experience:  16 years of experience
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2000 volkswagen jetta: with a manual transmission..removing

Customer Question

I have a 2000 volkswagon jetta 2.0 with a manual transmission. I need to relace the front wheel bearings and I'm using a hub shark. I'm down to removing the hub and I'm stuck at this point. I do not have an impact wrench and I've been trying to use a breaker bar but it isn't working, any suggestions?
Submitted: 5 years ago.
Category: Car
Expert:  CarDoc replied 5 years ago.
You're just trying to get the hub out of the bearing, or the bearing out of the knuckle?
Customer: replied 5 years ago.
Both, but right now I'm trying to get the hub out of the bearing so I can have access to the snapring that holds the bearing in the steering knuckle
Expert:  CarDoc replied 5 years ago.
Ok, and the tool you're using is the Hubshark by Old Forge?

Related Car Questions