How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask david Your Own Question
david
david, Auto Service Technician
Category: Car
Satisfied Customers: 1500
Experience:  Certified Master Technician,Certified in diesel & gasoline engines
533087
Type Your Car Question Here...
david is online now
A new question is answered every 9 seconds

2006 Isuzu: hub assembly..access to the bolts that seperate the rotor

Customer Question

I have removed the rotor and hub assembly from my 2006 Isuzu NPR... how do i remove the gear assembly to gain access to the bolts that seperate the rotor and the hub?
Submitted: 6 years ago.
Category: Car
Expert:  david replied 6 years ago.

david :

Hi thank you for your question hope this helps.

david :

You are talking about the ABC ring right? It has gear teeth around the out side.

david :

You need to use a pry bar to pry it off. A hooked bar works the best.

david :

Now the hub bolts are torqued to 90 ft pounds along with thread locker. The best way to get them off is to heat them up with a torch.

david :

Hope this helps
Good luck

Related Car Questions