How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Paul M ASE Master Your Own Question
Paul M ASE Master
Paul M ASE Master, ASE Master Tech
Category: Car
Satisfied Customers: 4683
Experience:  Ase Master 20+ Years Experience Foreign and Domestic
28939717
Type Your Car Question Here...
Paul M ASE Master is online now
A new question is answered every 9 seconds

Mitsubishi: ES..I am looking for the PCM fuse which powers the DLC

Customer Question

What are the labels on the fuse panels of a Mitsubishi Lance ES, 2003. I am looking for the PCM fuse which powers the DLC.
Submitted: 6 years ago.
Category: Car
Expert:  Paul M ASE Master replied 6 years ago.

Hello and thank you for using Just Answer

 

the fuse that Powers the Data Link Connector Pin (#16) is the Fuse #15 (15 Amp)

 

click here for the datalink wiring diagram

 

click here for the fuse #15 location

 

let me know how you make out

 

Paul

 

 

Customer: replied 6 years ago.
Hi I must be diffrent but my PCM is on the left side of the center concel and on this diagram I do not see a hot wire going to the PCM from fuse #15 or 16 ? It apears that I do not have juice to the PCM.
Expert:  Paul M ASE Master replied 6 years ago.

do you have a test light?

 

fuse #15 powers the DLC pin #16

 

graphic

 

use a test light connected to ground and you should have power on pin 16 of the DLC (this is supplied through fuse #15)

 

let me know if you have power to both sides of fuse 15 and if you have power to the DLC pin 16....

 

Paul

Paul M ASE Master and 11 other Car Specialists are ready to help you
Customer: replied 6 years ago.
I found the problem, Thanx TIM
Expert:  Paul M ASE Master replied 6 years ago.

No problem

 

thank you for using Just Answer

 

Paul