How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Technician
Category: Car
Satisfied Customers: 15711
Experience:  GM master tech for 15 years/ASE master tech for 20 years
19513769
Type Your Car Question Here...
Gary is online now
A new question is answered every 9 seconds

HOW TO REPLACE WINDSHIELD WIPER MOTOR ON A 2006 PONTIAC G6

Customer Question

HOW TO REPLACE WINDSHIELD WIPER MOTOR ON A 2006 PONTIAC G6?
Submitted: 6 years ago.
Category: Car
Expert:  Gary replied 6 years ago.

this is the procedure to replace the wiper motor

 

  1. Remove the wiper arms.

    Attachments are only available to registered users.

    Register Here

    Attachments are only available to registered users.

    Register Here

    Attachments are only available to registered users.

    Register Here

    Attachments are only available to registered users.

    Register Here

 

  1. Remove the air inlet grille panel.
  2. Remove the bolts attaching the wiper module to the plenum.
  3. Carefully lift the wiper module out of the plenum.
  4. Disconnect the electrical connector from the wiper motor.
  5. Disconnect the clip retaining the electrical harness to the wiper module.
  6. Remove the wiper module assembly from the vehicle.