How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, ASE Certified Technician
Category: Car
Satisfied Customers: 53774
Experience:  ASE & Bosch Certified Master Tech. Over 30 years experience.
13230946
Type Your Car Question Here...
Marty is online now
A new question is answered every 9 seconds

I need a wiring schematic on a Warn M8000 winch

This answer was rated:

I need a wiring schematic on a Warn M8000 winch

eurotec :

Hi, click here for the service manual for the M8000 winch. Wiring diagrams are included in the manual.

JACUSTOMER-dqdbjjk1- :

I was very excited to see the entire winch manual until I scrolled down to the solenoid wiring diagram. It is not for my winch. My winch (serial no. 270263) has only a 3 wire remote switch but has four solenoids, but they are like the older Ford car and truck starter solenoids, not like the "base" mounted solenoids as shown in this manual. They bolt on from the "back" and have a large terminal on each side (for full current) and two small terminals on the "front" of each for the control wiring. Can you please check this out and re-reply to me?

eurotec :

Full Size Image

eurotec :

I found that one online. Any good?

Marty and 7 other Car Specialists are ready to help you