How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, Mechanic
Category: Car
Satisfied Customers: 15651
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Car Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

This is about a 1998 Isuzu Rodio

Customer Question

This is about a 1998 Isuzu Rodio
Submitted: 6 years ago.
Category: Car
Expert:  Tim's Auto Repair replied 6 years ago.

hi

i think this is what you are referring to

thanks

Please ACCEPT my answer so I can get credit for my work.i don't receive commission unless you do ..I'm not always going to be giving you good news,so please don't let this stand in the way of you accepting my answer.it does not cost you more money.we will still be able to communicate.. Bonuses and positive feedback are appreciated!if you are not satisfied with my answer,please do not leave bad feed back,i will gladly opt out and let another expert handle the question.PLEASE ASK IF YOU NEED MORE HELP

 

Isuzu_Rodeo_Rodeo_Sport_1997-2004

Overhaul

  • OUTBOARD JOINT
  • INNER JOINT
  • OUTER BOOT

 

Outboard Joint

 

The outer CV-joint is serviced with the axle shaft as an assembly. The outer CV-joint boot can be serviced by removing the inner CV-joint.

Inner Joint

 

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    Halfshaft from the vehicle Snapring and bearing Snapring and oil seal Mounting bracket CV-joint boot Circlip and inner joint housing Snapring and spacer Inner joint balls Snapring and inner CV-joint
  3. FIG : CV-joint spacer snapring-Inner CV-Joint

    Attachments are only available to registered users.

    Register Here


  4. To install:

    1. Install or connect the following:

      Inner CV-joint and snapring Inner joint balls Spacer and snapring Inner joint housing and circlip. Add 150 grams CV-joint grease. CV-joint boot Mounting bracket Oil seal and snapring Bearing and snapring
    2. Install the halfshaft and mounting bracket to the vehicle.
    3. Check the wheel alignment and adjust as necessary.

    Outer Boot



    The outer CV-joint is serviced with the axle shaft as an assembly. The outer CV-joint boot can be serviced by removing the inner CV-joint.