How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Your Own Question
Tom
Tom, ASE Certified Technician
Category: Car
Satisfied Customers: 25927
Experience:  ASE Certified Master Technician
3827149
Type Your Car Question Here...
Tom is online now
A new question is answered every 9 seconds

1994 Mazda 626: 2.5L..main relay..depress..the car will crank

This answer was rated:

Hi
I have a 1994 Mazda 626 2.5L DOHC. The EGI main relay is not working the car will not crank, but if you depress the contact point the car will crank. What is not working

Donald
This is telling you the relay is bad was it replaced?
Customer: replied 6 years ago.
yes
Ok have you replaced the fuel pump relay also. The ECM energizes the EGI relay and fuel pump relay. If the fuel pump relay is bad it will cause this. Was the fuel pump relay replaced?
Customer: replied 6 years ago.
No have not replaced the fuel pump relay
Ok this would be the next step for this issue. If there is still an issue it's in the fuse box or harness . Hoped this helped .Positive feedback and bonuses greatly appreciated.
Tom and other Car Specialists are ready to help you