How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff
brownjeff, ASE Certified Technician
Category: Car
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
11021861
Type Your Car Question Here...
brownjeff is online now
A new question is answered every 9 seconds

Drivers side motor to tap it to see it will work again? TKS BHF

Resolved Question:

how do i get at drivers side motor to tap it to see it will work again?

TKS

BHF
Submitted: 6 years ago via AllDataDIY.
Category: Car
Expert:  brownjeff replied 6 years ago.
You would need to remove the door panel

graphic

graphic

Front door finisher
  1. Remove inside handle escutcheon. A
  2. Remove power window switch finisher, then disconnect the connectors. B
  3. Remove screw securing pull handle, and then remove pull handle.
  4. Remove mask securing front door finisher. C
  5. Remove screw securing front door finisher.
  6. Remove clips securing front door finisher.
  7. Lift out front door finisher. Disconnect harness connectors. D
graphic
Customer: replied 6 years ago.

I AM SORRY THAT I DIDNT EXPLAIN IT CORRECTLY.....THE LET FRONT POWER SEAT BACKWARDS AND FORWARD MOTOR POSITION MOTION DOSENT WORK. THE UP DOWN ON THE SAME CONTROL DOES WORK HOWEVER.

 

THANK YOU

 

BHF

Expert:  brownjeff replied 6 years ago.
Using the power seat switch, tilt the front edge of the seat bottom all the way up. The motor your looking for is in the front left corner of the seat frame and will be able to see if you look under the seat with it raised up

Edited by brownjeff on 9/1/2010 at 7:08 PM EST
brownjeff and 9 other Car Specialists are ready to help you