How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Nova Your Own Question
Dave Nova
Dave Nova, ASE Certified Tech
Category: Car
Satisfied Customers: 19450
Experience:  ASE Master Certification. GM World Class Certification
11042942
Type Your Car Question Here...
Dave Nova is online now
A new question is answered every 9 seconds

what is the firing order for a 1976 International Scout engine

This answer was rated:

what is the firing order for a 1976 International Scout engine 304 cc ?

Firing order 1-8-4-3-6-5-7-2

 

Distributor rotation is clockwise. To find the correct position on the cap you must set the engine at top dead center, remove the cap and where the rotor is pointing is the correct #1 position. Hope this helps.

Customer: replied 6 years ago.
Wonderful! Is Number 1 cylinder on the left bank facing the engine? and can I ask you another International question?
The #1 cylinder is on the drivers side. If you are facing the engine, it will be on your right hand side. Drivers side cylinders from front to back are 1-3-5-7 Passenger side cylinders are 2-4-6-8
Customer: replied 6 years ago.
You are sooo good! One last question that has us stumped is how do you remove / replace the Key/Ignition cylinder from the steering column?

You'll have to remove the steering wheel, then the turn signal switch. Below that there is a pin that unscrews and the cylinder will then pull out.

 

graphic

Dave Nova and 7 other Car Specialists are ready to help you
Customer: replied 6 years ago.
Thanks so much
You are welcome. Thanks for using Just answer.

Related Car Questions