How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask transman Your Own Question
transman
transman, automotive instructor
Category: Car
Satisfied Customers: 4078
Experience:  28 years exp,complete autmotive diagnostics and repair
14457476
Type Your Car Question Here...
transman is online now
A new question is answered every 9 seconds

serpentine belt diagram 2001 oldsmobile aurora

Resolved Question:

serpentine belt diagram 2001 oldsmobile aurora
Submitted: 6 years ago.
Category: Car
Expert:  transman replied 6 years ago.
make sure you copy or print this page right away.

Drive Belt Replacement

Removal Procedure

  1. Remove the drive belt tension by lifting or rotating the drive belt tensioner off of the drive belt, using a 3/8-inch or 1/2-inch breaker bar.
  2. Remove the drive belt.
  3. Inspect all the components and pulleys driven by the drive belt.

Installation Procedure



Important: Make sure that the drive belt is aligned into the proper grooves of the accessory drive belt pulleys.

  1. Install the drive belt under the drive belt tensioner pulley by lifting or rotating the drive belt tensioner, using a 3/8-inch or 1/2-inch breaker bar.
  2. Inspect the drive belt and the drive belt system.
  3. Make sure that the drive belt is properly routed.
  4. Inspect the drive belt length scale on the drive belt tensioner for the proper installed length.

 

transman and 4 other Car Specialists are ready to help you

Related Car Questions