How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask hauto Your Own Question
hauto, Technician
Category: Car
Satisfied Customers: 2727
Experience:  15 year hands on technician experince, associate degree in automotive technologhy
Type Your Car Question Here...
hauto is online now
A new question is answered every 9 seconds

Location windshield wiper water pump 2000 jeep cherokee sport 6cyd

Resolved Question:

location windshield wiper water pump 2000 jeep cherokee sport 6cyd
Submitted: 6 years ago.
Category: Car
Expert:  hauto replied 6 years ago.


  1. Disconnect end isolate the battery negative cable.
  2. Raise and support the vehicle.
  3. Remove the left front inner wheelhouse splash shield.
  4. Remove the washer supply hose(s) from the barbed outlet nipple of the washer pump(s) and drain the washer fluid from the reservoir into a clean container for reuse.
  5. Unplug the wire harness connectors from the washer pump(s).
  6. Using a trim stick or another suitable wide flat-bladed tool, gently pry the barbed inlet nipple of the washer pump out of the rubber grommet seal in the reservoir. Care must be taken not to damage the reservoir.
  7. Remove the rubber grommet seal from the reservoir and discard.
  8. Reverse the removal procedures to install. Always use a new rubber grommet seal on the reservoir.


hauto and 3 other Car Specialists are ready to help you