How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim West Your Own Question
Tim West
Tim West, ASE Certified Technician
Category: Car
Satisfied Customers: 4638
Experience:  ASE Certified Service Manager for Bridgstone/ Firestone
9949505
Type Your Car Question Here...
Tim West is online now
A new question is answered every 9 seconds

navigator: compressor wont stop running..relay..controls..adjustment

This answer was rated:

on my navigator the compressor won't stop running unless i remove a fuse or relay. I suspect the problem could be the sensor that controls the hieght,but i don't know where to locate it or what to do for an adjustment.
Thanks for visiting Just Answer,

You have 1 of 3 issues.
1. bad compressor relay
2. bad air suspension control module
3. short to ground in wiring.

Check the relay and make sure it's not corroded. You may even consider replacing.
graphic

Attempt to unplug the suspension control module and see if the pump will start running. If so, you likely have a bad module. If it will not turn off with the module disconnected let me know, and we will go over some wiring trobleshooting.
Please let me know.
graphic

Tim West and 3 other Car Specialists are ready to help you
Customer: replied 6 years ago.
Hi tim. I do apologize for not replying sooner,I haven't had a chance to check the proceedures as of yet.But i am excepting your answer.Thanks John.
That is ok, just check it out and get back to me. I will be here.