How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 20437
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

how do you program a remote for a 2000 saab 9-3

Resolved Question:

how do you program a remote for a 2000 saab 9-3
Submitted: 6 years ago.
Category: Car
Expert:  Lurch replied 6 years ago.



The remote control for the car must be programmed (coded) for that particular car, via Dealer Scan Tool.
When the car is delivered, 2 already programmed remote controls are supplied.

It is possible to have another 2 remote controls (4 in all) for the car.

Programming is performed with the Dealer Scan Tool.

The number of pre-programmed remote controls can be checked by pressing the TAILGATE button on the remote control when the ignition key is in the ON position.

SID will normally display 2 REMOTE KEY for 5 seconds

Lurch and 3 other Car Specialists are ready to help you