How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Car
Satisfied Customers: 29964
Experience:  Automotive Repair Shop Manager, Technician/JA Mentor
3195632
Type Your Car Question Here...
Eric is online now
A new question is answered every 9 seconds

2005 kia sportage: v6..a tune up how do i remove the top part to get

Resolved Question:

on my 2005 kia sportage v6 i going to do a tune up how do i remove the top part to get to the plugs in the back al, front royal va
Submitted: 6 years ago.
Category: Car
Expert:  Eric replied 6 years ago.

Hi,

 

Below are illustrated directions to remove the surge tank:

 

INTAKE MANIFOLD

 

 

REMOVAL
INTAKE MANIFOLD
1.Remove the engine cover.
2.Remove air cleaner hose.
3.Remove surge tank assembly.
(1)Disconnect the accelerator cable.

(2)Disconnect the TPS connector(A).
(3)Disconnect the ISA connector(B).
(4)Disconnect the VIS actuator connector(C).
(5)Disconnect the injector connector(D).
(6)Disconnect the PCSV connector(E).

(7)Disconnect the PCSV hose.
(8)Disconnect the brake booster vacuum hose(A).

(9)Disconnect the PCV hose.
(10)Disconnect the IAT sensor connector(A).
(11)Disconnect the VIS actuator connector(B).

(12)Disconnect the ground cable(A) from the surge tank assembly.

(13)Remove the surge tank stay.

(14)Remove the surge tank assembly(A).

 

 

 

Eric and 7 other Car Specialists are ready to help you
Customer: replied 6 years ago.
thanks eric for the info the job is finished