How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff
brownjeff, ASE Certified Technician
Category: Car
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
11021861
Type Your Car Question Here...
brownjeff is online now
A new question is answered every 9 seconds

How do you replace the fuel senders in a 2007 Hyundia Santa

Resolved Question:

How do you replace the fuel senders in a 2007 Hyundia Santa Fe?
Submitted: 7 years ago.
Category: Car
Expert:  brownjeff replied 7 years ago.

Here is information on the senders:

 

  • Remove the 2nd seat.
  •  

     

    graphic

     

    Open the carpet for fuel pump (A).

     

    graphic

     

    Remove the service cover for fuel pump (A).

     

    graphic

     

  • Disconnect the fuel pump connector (A).
  • Start the engine and wait until fuel in fuel line is exhausted.
  • After engine stops, turn the ignition switch off.
  •  

    graphic

     

  • Open the carpet for sub fuel sender (A).
  •  

     

    graphic

     

    Open the service cover for sub fuel sender (A).

     

    graphic

     

  • Disconnect the sub fuel sender connector (A) and the vacuum tube quick-connector (B)
  • Unfasten the sub fuel sender plate cover (C) and disconnect the suction tube at the bottom of the fuel pump.
  •  

     

    graphic

     

    1. Remove the sub fuel sender from the fuel tank.

    INSTALLATION

    1. Install the sub fuel sender in according to the reverse order of "REMOVAL" procedure.
    brownjeff and 12 other Car Specialists are ready to help you