How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1081
Experience:  16 years of experience
2499435
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2002 Hyundai: s a automatic transaxle.I..sensors

Customer Question

I have a 2002 Hyundai with the check engi on.ne light.the code say it's the control speed sensor.It's a automatic transaxle.I would like to see a picture that shows the location of the sensors and how many
Submitted: 6 years ago.
Category: Car
Expert:  Dan replied 6 years ago.
Do you have the exact code number? Thanks
Customer: replied 6 years ago.
I have a 2002 Hyundai and the check engine light is on,I had it check and the codes pl501/ pl502 came up.It said the speed control sensor was bad,so I put a new one on and the light came back on in a few miles.I would like to see a picture showing me the location of the sensors that control the speed control
Expert:  Dan replied 6 years ago.

 

does your car have abs?

P0501 Vehicle Speed Sensor Circuit Performance

Possible CausesSetting Conditions
  • VSS signal circuit from the sensor to the I/P Cluster to the PCM is open, shorted to ground or to system power
  • VSS positive (+) signal circuit is open or shorted to ground
  • VSS negative (-) signal circuit is open or shorted to ground
  • VSS has failed