How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Certified Technician
Category: Car
Satisfied Customers: 12744
Experience:  32 years Foreign / Domestic Cars All aspects of Diag and Repair
13677702
Type Your Car Question Here...
Randall C is online now
A new question is answered every 9 seconds

My serpentine belt popped off.

Customer Question

My serpentine belt popped off. it is in good condition, just dont know what to do to loosen which pulley
Submitted: 6 years ago.
Category: Car
Expert:  Randall C replied 6 years ago.
Hello, below is inofrmation on how to do the belt replacement

Serpentine Belt Routing & Replacement


REMOVE OR DISCONNECT
  1. Negative battery cable.
  2. Coolant recovery bottle.
  3. Lift or rotate tensioner using an 18 mm box end wrench on pulley nut.
  4. Serpentine drive belt.

INSTALL OR CONNECT

  1. Lift or rotate tensioner using an 18 mm box end wrench on pulley nut.
  2. Serpentine drive belt.
  3. Coolant recovery bottle.
  4. Negative battery cable and tighten bolt to15 Nm (11 ft lbs) . NOTE: In order to observe the belt tension indicator, it may be necessary to turn the power steering pulley so you can look through the holes.

 



 

Randall C and other Car Specialists are ready to help you
Customer: replied 6 years ago.
Thank you very much. Your answer was very informative and the illustration was an extra bonus.
Expert:  Randall C replied 6 years ago.
You are welcome. Good luck with it. Thanks

Related Car Questions