How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Car expert Your Own Question
Car expert
Car expert, ASE Certified Technician
Category: Car
Satisfied Customers: 10370
Experience:  ASE MASTER TECHNICIAN,30 YRS EXPERIENCE
22989858
Type Your Car Question Here...
Car expert is online now
A new question is answered every 9 seconds

change spark plugs on 2002 montero sport

Customer Question

change spark plugs on 2002 montero sport
Submitted: 7 years ago.
Category: Car
Expert:  Car expert replied 7 years ago.

Here's the proper procedure to replace the spark plugs

 



Service and Repair
Notes

 



REMOVAL AND INSTALLATION

REMOVAL STEPS

 

  1. SPARK PLUG CABLES.
  2. SPARK PLUGS.

INSTALLATION STEPS

  1. SPARK PLUGS.
  2. SPARK PLUG CABLES.

For removal and installation for the intake manifold plenum, refer to Intake Manifold / Service and Repair/ Intake Manifold Plenum . See: Intake Manifold\Service and Repair




Service and Repair
Notes

 

Part 1

Part 2

REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT

<> FUEL RAIL (WITH INJECTORS) REMOVAL

CAUTION: Care must be taken when removing the fuel rail: Do not drop the injectors.

Remove the fuel rail with the injectors attached to it.

INSTALLATION SERVICE POINTS


>>A<< INTAKE MANIFOLD GASKET INSTALLATION

Install the gasket with the protrusions in the position illustrated.



>>B<< INTAKE MANIFOLD INSTALLATION
Tighten the nuts by the following procedure.


>>C<< FUEL PRESSURE REGULATOR/HIGH-PRESSURE FUEL HOSE INSTALLATION

CAUTION: Be careful not to allow any engine oil to enter the fuel rail.
When connecting the fuel pressure regulator and the high-pressure fuel hose to the fuel rail, apply a small amount of new engine oil to the O-ring. Then insert the high-pressure fuel hose, being careful not to damage the O-ring.


>>D<< INTAKE MANIFOLD PLENUM GASKET INSTALLATION
Install the gasket with the protrusion in the position illustrated.

 

 

Customer: replied 7 years ago.
that is what i was looking for wow what a mess
Expert:  Car expert replied 7 years ago.
Yes this is not a simple job on this car

Related Car Questions