How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask DBranch Your Own Question
DBranch
DBranch, ASE Certified Technician
Category: Car
Satisfied Customers: 706
Experience:  Factory trained Silver Certified Land Rover Technician. 7 years of automotive experience.
9901235
Type Your Car Question Here...
DBranch is online now
A new question is answered every 9 seconds

harness..99 and the fuse box is not the same as p38..connector..CLUTCH

This answer was rated:

hi I just received my link harness for my p38. but my rr is from 99 and the fuse box is not the same as p38 up to 98. SO THE VOLTAGE IS MORE THAN 11.5 into the engine mutiplug(connector) just before ac compressor multiplug. BUT WHY THE AC COMPRESSOR NOT CLUTCH? WHAT RESOLUTION FOR P38 MODEL 2000 (bosh engine)for ac compressor clutch? IN THE TECHNICAL INFO THE SITUATION IS SAME( handbook and no air con)my is vin.... XA417682.I I CHECK AND RENEW ALL CONTROL SYSTEM COMPONENTS: SINGLE AND DUAL PRESSURE SWITCH AN AMBIENT AIR TEMP SENSOR(OUT SIDE TEMP) RENEW FUSES 8 AND 17 .
A SUNGLIHT SENSOR A EVAPORATOR TEMP SENSOR AND A HEATER COOLANT TEMPT SENSOR.
You will have to replace the ac compressor.
DBranch and 9 other Car Specialists are ready to help you
Customer: replied 7 years ago.
Relist: Incomplete answer.
hello sir ijust renew +R134 FREON but no ac compressor clutch. what can I DO?
THE ATC ECU DO NOT AGREES THE COMPRESSOR. WHY.