How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kalamykid Your Own Question
Kalamykid
Kalamykid, Shop owner/ Tech.
Category: Car
Satisfied Customers: 3838
Experience:  I HAVE OWNED MY OWN SHOP FOR OVER THREE YEARS. I HAVE THE TOOLS AND SOFTWARE TO ANSWERE ALMOST ANY Q
5629372
Type Your Car Question Here...
Kalamykid is online now
A new question is answered every 9 seconds

rx: i put brake fluid

Customer Question

where do i put brake fluid into my mazda rx7 1985 12a (australia 1st gen)? and what type? Thanks
Submitted: 6 years ago.
Category: Car
Expert:  Kalamykid replied 6 years ago.
For the brakes or the clutch?
Customer: replied 6 years ago.
I don't know - the warning light is on on the dash - maybe detail both? Thanks
Expert:  Kalamykid replied 6 years ago.
Is your car a left or right hand steer?
Expert:  Kalamykid replied 6 years ago.
I have 3 rx7's, one of them is a right hand steer. I love the cars. I have built all of mine from the ground up, even the engine. I can help you with this problem but need to know how your car is set up. The master cylinder is mounted on the right for a right hand steer car" steering wheel on right side' and on the left for a left hand steer.
Customer: replied 6 years ago.
Australia here, so drivers side is right hand seat.

Hope that helps.

Schwabenmd
Expert:  Kalamykid replied 6 years ago.
Ok Pop the hood and raise it.. Look over the the right fender, on your left there will be a black brake booster with a master cylinder on the front of it. unscrew the black cap from the top and fill to top fill line with dot 3 brake fluid.