How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Serg Your Own Question
Serg
Serg, Mechanic
Category: Car
Satisfied Customers: 88
Experience:  i own small automotive business,worked on cars for 10 years
29789600
Type Your Car Question Here...
Serg is online now
A new question is answered every 9 seconds

HOW TO ADJUST VALVE CLEARANCES FOR SUZUKI CARRY VAN G13BB ENGINE

This answer was rated:

HOW TO ADJUST VALVE CLEARANCES FOR SUZUKI CARRY VAN G13BB ENGINE 16-VALVE
Hi what is engine displacement?
Customer: replied 6 years ago.

4cyl 1300cc 16-valve - firing order 1324

Disconnect battery. remove valve cover. turn crankshaft pulley clockwise until mark V will align with mark 0 on timing belt cover. see if the rocker arms of #1 cylinder are off respective cam lobes. if so valves 1,2,5 and 7 ready for clearance

http://www.sendspace.com/file/1lwhq8

Customer: replied 6 years ago.

so when at TDC #1 i can adjust valves 1,2,5 & 7? is so what do i do next???

 

after setting those 1,2,5 7 valves rotate engine 360 clockwise and set valves 3,4,6,8 make sure cylinder 4 rocker arms are off respective cam lobes.set clearance with engine cold intake valves 0.13-0.17 mm and exhaust 0.23-0.27 mm and good luck
Customer: replied 6 years ago.

when i'm at TDC #1 valves 1&7 are opening or closing. didn't think i could adjust clearance whilst in this position???

When at TDC#1 both valves should be closed because the is a spark at the momentLaughing

just set # XXXXX in TDC. if rocker arms are not loose on # XXXXX means you are in # XXXXX TDC.

So rotate engine again 360 and your # XXXXX rocker arms will become loose. if you have more ??? just ask-i'm here to help. Thank you

Serg and 2 other Car Specialists are ready to help you